Homelab Plan

Home server guide

What hardware does a home server need, and what will it cost to run?

Pick what the server is for. See the smallest hardware that does it, a comfortable step up, what each draws at the wall when it is idle, and what that costs a year at the price on your bill. Estimates only.

01 · Goal, 02 · Hardware class, 03 · Watts at the wall

What is it for?

A media server (Jellyfin or Plex)

MinimumComfortable
ProcessorIntel N100 class, with Intel graphics for transcodingCore i5-11400 class or newer, with Intel graphics
Memory4 GB on Linux with no desktop, 8 GB otherwise8 to 16 GB
Storage100 GB SSD for the system, one hard drive for the media (judgement)SSD for the system, two mirrored hard drives
NetworkGigabit Ethernet, wiredGigabit Ethernet, wired
Idle at the wall4.8–12.9 WLow-power PC (Intel N-series) 2.4–6.8 W 1 + 1 drive 2.4–6.1 W 38.8–25.4 WDesktop-class PC 4.0–13.2 W 1 + 2 drives × 2.4–6.1 W 3
Busy at the wallIdle only. No public source gives this PC's busy power.Each hard drive reads or writes at 4.0–8.8 W 3Idle only. No public source gives this PC's busy power.Each hard drive reads or writes at 4.0–8.8 W 3
A year at your priceType a price belowType a price below

A processor alone, with no graphics help, needs a PassMark score of about 2,000 for each 1080p stream it converts, and about 17,000 for one 4K HDR stream (Plex's guide). Jellyfin's guide recommends Intel graphics to do this work instead of the processor. Sources 6 7

A NAS for files and backups (TrueNAS or similar)

MinimumComfortable
Processor2-core 64-bit Intel or AMD processorDesktop-class, with ECC memory support if you can
Memory8 GB16 GB, ECC if the board takes it
Storage16 GB SSD to boot from, two hard drives of one sizeSSD to boot from, four hard drives
NetworkGigabit Ethernet2.5 Gigabit Ethernet
Idle at the wall7.2–19.0 WLow-power PC (Intel N-series) 2.4–6.8 W 1 + 2 drives × 2.4–6.1 W 313.6–37.6 WDesktop-class PC 4.0–13.2 W 1 + 4 drives × 2.4–6.1 W 3
Busy at the wallIdle only. No public source gives this PC's busy power.Each hard drive reads or writes at 4.0–8.8 W 3Idle only. No public source gives this PC's busy power.Each hard drive reads or writes at 4.0–8.8 W 3
A year at your priceType a price belowType a price below

TrueNAS asks for 8 GB for up to eight drives and 1 GB more for each drive after that. The drives are most of the power: four drives idle draw more than the box itself. The low-power PC class in the minimum rarely takes two 3.5-inch drives, and a 2-bay box may idle higher than the figure shown. Sources 8

Home Assistant

MinimumComfortable
ProcessorQuad-core ARM board or appliance, such as a Raspberry Pi 4 or 5Low-power mini PC, Intel N100 class
Memory2 GB8 GB
Storage32 GB128 GB SSD or more
NetworkEthernet, wiredEthernet, wired
Idle at the wall1.7 WHome Assistant Green (at 12 V) 1.7 W 22.4–6.8 WLow-power PC (Intel N-series) 2.4–6.8 W 1
Busy at the wall3.0 WHome Assistant Green (at 12 V) under load 2Idle only. No public source gives busy power for this class.
A year at your priceType a price belowType a price below

The minimum's power figure is the maker's figure for Home Assistant Green: 1.7 W idle, 3 W under load. A Raspberry Pi draws a different amount, which is not listed here. A mini PC leaves room for add-ons such as camera recording. Sources 9 2

A small Proxmox host for a few virtual machines

MinimumComfortable
Processor64-bit, with Intel VT-x or AMD-V turned onDesktop-class, 6 cores or more, with VT-d for passing devices through
Memory8 GB: 2 GB for Proxmox, the rest for the guests (judgement)32 GB, and 1 GB more for each TB on ZFS
Storage256 GB SSD (judgement)Two SSDs, mirrored
NetworkOne Gigabit port (judgement)Two Gigabit ports or faster
Idle at the wall2.4–6.8 WLow-power PC (Intel N-series) 2.4–6.8 W 14.0–13.2 WDesktop-class PC 4.0–13.2 W 1
Busy at the wallIdle only. No public source gives busy power for this class.Idle only. No public source gives busy power for this class.
A year at your priceType a price belowType a price below

Proxmox needs 2 GB for itself, plus the memory of every guest, plus about 1 GB for each TB used on ZFS or Ceph. Add up the guests first: memory runs out before the processor does. Sources 10

Idle power at the wall, from the sources listed below the calculator. A busy server draws more: the processor alone can draw up to its rated power, which is 6 W for an Intel N100 4, and 65 W for a Core i5-12400, up to 117 W in turbo 5. Most home servers are idle for most of the day. The minimum column starts from each project's stated minimum or recommended hardware; where none is given, it is a judgement, and the cell says so. The comfortable column is a judgement, not a rule. The Home Assistant Green and hard drive figures are the makers' figures measured at the device (12 V), before its power supply, so the totals read a little low.

04 · Cost a year

Running cost at your price

Filled in with an example price. Type the price per kWh from your own bill.

From your bill, with tax if your bill adds it

A year

The figures appear here when the page has loaded.

Estimates only, in the currency of the price you typed. The cost leaves out the daily fixed charge on your bill, time-of-use and tiered rates, and anything solar gives back. The kWh are rounded to 0.1 before the price is applied.

Add up a rack's watts and amps

Several boxes on one power strip or PDU? The rack power calculator on Rack Power Check adds their watts and sets the amps against the rating.

What it does not cover

Where the figures come from

  1. ENERGY STAR computer list, version 9.0, desktops, US Environmental Protection Agency. Read 20 Nov 2026. Short-idle power at the wall of every desktop on the list, as listed (dataset updated 13 Nov 2026). Worked out from it: Intel N-series, Celeron or Pentium processors with no graphics card, 13 models, middle 80 % 2.4 to 6.8 W (median 5.2 W). Other desktop processors with no graphics card, 177 models, middle 80 % 4.0 to 13.2 W (median 7.7 W).
  2. Home Assistant Green, specifications, Home Assistant. Read 20 Nov 2026. Idle: ~1.7 W at 12 V Load: ~3 W at 12 V Also: 4 GB RAM, 32 GB eMMC storage.
  3. WD Red Plus NAS hard drives, product brief (March 2025), Western Digital. Read 20 Nov 2026. Average power, 2 TB to 12 TB models: idle 2.4 to 6.1 W, read/write 4.0 to 8.8 W, standby and sleep 0.3 to 0.6 W.
  4. Intel Processor N100, specifications, Intel. Read 20 Nov 2026. TDP 6 W
  5. Intel Core i5-12400, specifications, Intel. Read 20 Nov 2026. Processor Base Power 65 W ... Maximum Turbo Power 117 W
  6. Jellyfin, Selecting Appropriate Hardware, Jellyfin. Read 20 Nov 2026. CPU: Intel Core i5-11400, Intel Pentium Gold G7400, Intel N100, Apple M series or newer Also: "at least 8GB is recommended for the average deployment. For a Linux server running without a GUI, 4GB may be enough"; "Storage: 100GB SSD for your OS, Jellyfin files and transcoding cache"; "Networking: Gigabit Ethernet Adapter or faster, WiFi or Powerline not recommended".
  7. Plex support article on the processor a server needs, Plex. Read 20 Nov 2026. 1080p (10Mbps, H.264) file: 2000 PassMark score Also: "4K HDR (50Mbps, 10-bit HEVC) file: 17000 PassMark score". These are for one stream transcoded by the processor alone.
  8. TrueNAS Hardware Guide, version 25.10, TrueNAS. Read 20 Nov 2026. 2-Core Intel 64-Bit or AMD x86_64 processor 8 GB memory 16 GB SSD boot device Two identically-sized devices for a single storage pool Also: "Add 1 GB for each drive added after eight".
  9. Home Assistant, installation, Home Assistant. Read 20 Nov 2026. Raspberry Pi 4 or 5 with power supply (minimum 2 GB RAM) For a virtual machine (home-assistant.io/installation/alternative): "Memory: 2 GB of RAM", "Processors: 2 vCPUs".
  10. Proxmox VE, system requirements, Proxmox. Read 20 Nov 2026. Memory, minimum 2 GB for OS and Proxmox VE services. Plus designated memory for guests. For Ceph or ZFS additional memory is required, approximately 1 GB memory for every TB used storage. Also: "Redundant Gbit NICs" in the recommended hardware; "Minimum 1 GB RAM" for testing only.

Plan the whole setup

The planner puts several goals on one box: the parts and why each is there, how it connects, and the set-up steps.

Open the planner

Questions

Why idle power, and not the power supply's rating?

A power supply's rating is the most it can give, not what the box draws. A home server is idle for most of the day, so its idle draw sets most of the bill. A plug-in meter at the wall gives the real figure for your box.

Where is the price per kWh on a bill?

On your power bill, as the price per unit or per kWh. If the bill gives cents, choose "in cents, like 30" beside the box. Use the price with tax if your bill adds tax to it.

How is the cost worked out?

Watts times hours a day times 365 days, divided by 1,000, gives kWh a year. The kWh, rounded to 0.1, times your price gives the cost. The sum is shown beside the result.

Why are the power figures ranges?

Boxes of the same class draw different amounts. The range for a PC is the middle 80 % of the models of that class on the ENERGY STAR list. The range for drives is from the lowest to the highest figure in the maker's list, which covers the 2 to 12 TB models.

Will it fit in my rack, and will my power strip take it?

For the watts and amps on one strip or PDU, use the rack power calculator on Rack Power Check. For the space a rack has left, use its rack elevation diagram.

Is the answer a guarantee?

No. It gives estimates only, from published figures and the numbers you enter.